Beijing Xinxiaoyuan Software
News Center
Focus on panel furniture design and research and development | Committed to empowering the development and innovation of China's traditional manufacturing industry
What is the price difference between different panel saws?
Publish Time:
2021-10-07 12:36
Source:
CNC panel saws are widely used, especially in the production of panel furniture. They can not only carve irregular patterns but also achieve excellent cutting results for irregularly shaped panels. In addition, CNC panel saws have powerful functions. Step-by-step operations allow for cutting, punching, and slotting, and the price is relatively inexpensive.
However, many furniture manufacturers easily fall into price traps when purchasing CNC panel saws, opting for low prices and ignoring the following important factors.
The spindle power of a CNC panel saw directly affects its cutting efficiency. If you need to cut thicker panels, it is recommended to use a high-power spindle.
The basic motor for a CNC panel saw is a stepper motor. If you want to slightly improve performance, you can choose a domestic servo motor. A good configuration would be a product from an internationally known servo motor brand. The price difference between the three is also relatively large.
CNC panel saw vacuum pumps are divided into air-cooled and water-cooled types. Air-cooled pumps are noisier than water-cooled ones. If using a water-cooled vacuum pump, consider the anti-freezing issue for the air pump during autumn and winter.
The panel saw's nesting software is crucial. If you have this need, you can purchase licensed or pirated software. While licensed software is expensive, it allows for upgrades. Pirated software can also be used but does not offer upgrades.
The four points above are the basic reasons for the price differences in CNC panel saws for panel furniture manufacturers. I hope you will be discerning when purchasing a CNC panel saw and buy one that is right for you.
Details on using the panel saw:
1. During operation, strictly prohibit inserting hands into the pressure beam or opening the head cover to avoid accidents. Before replacing the electronic cutting saw blade, adjusting the machine, or performing maintenance, be sure to turn off the power.
2. Before processing, check if the saw blade is sharp to prevent cracking of the panels due to a dull blade, affecting the processing quality.
3. Before starting the electronic cutting saw, carefully check if the head and cutter clamp are at the mechanical origin.
4. During operation, the electronic cutting saw fan must be turned on first. When sliding, gently push the panel into the tool clamp and align it at a right angle with the support plate. When entering the dimensions, carefully leave sufficient allowance to ensure that the cut panel is at a right angle.
5. When leaving the electronic cutting saw, when changing the saw blade, adjusting the machine, or before maintenance, turn off the power, that is, the main switch of the machine.
All electronic cutting saws should use dust extraction equipment:
Each part of the component, such as connectors, production parts, worktable, guide rail surfaces, and the inside of the equipment, should be cleaned according to the situation with higher production capacity.
Parts requiring lubrication after work: worktable, guide rails, processing surface.
Parts requiring lubrication after work: motor shaft, lifting shaft, marking saw blade, screw rod, screw nut, and other matching parts that rotate and slide relatively.
Pay special attention to cleaning the mobile worktable guide rails and applying mechanical lubricating oil.
Opening machine
Related News
Beijing Xinxiaoyuan Software Development Co., Ltd.
You can also dial one-on-one consultation telephone: +86-18027671488
Contact Us
ADD：Zhongguancun North District, Haidian District, Beijing
E-mail：404648544@qq.com
Scan to Follow Official Account
Scan to Get a Quote