Xin Xiao Yuan Smart Home Design and Production Software

 

 

Design 1.9 Version 6.4 Update Notes

Production 3.7 Version 2.6 Update Notes

Sorting and Packaging 1.1.0.4

 

      

New Features

Design Software

• Fixed an issue where the exported edge banding list did not automatically generate based on the thickness of the panels.
• Fixed Fixed an issue where imported CAD panels with holes smaller than the cutting tool diameter could not be processed using the cutting tool and required a corresponding tool.
• Fixed an issue where cabinet data could not be saved.
• Added grid lines with an option to enable or disable them.
• Fixed an issue where the end cap needed to appear on the door panel list; the end cap setting name, including the words "door panel," appears on the door panel list.
• Fixed an issue where hole positions on the left side of a mirrored cabinet were missing on the right side.
• Modified the display length of panel names.
• Added options for edge banding on drawers: edge banding on the punched side only, or edge banding on the unpunched side only.
• Added arc baseboard, priced by area.
• Added search function to the material list box.
• Fixed Fixed an issue where the door panel marking lines were reversed in CAD and PDF exports.
• Added support for chamfered arc cabinets.
• Fixed an issue where editing a door panel would cause the door panel color to be re-added.
• Fixed an issue where door hinges replacing hardware and shelves/side panels caused collisions in the groove.
• Added custom door hinge prefix.
• Modified the copying of panels to remove the "(copy)" suffix.

 

 

Production Software

• Added Ban Jidong handle-free design: set for single-pass processing, only using the forming knife.
• Fixed issues with automatic start/stop: six-sided information, Jidong processing files, Jidong six-sided, Nanxing optimized series files.
• Fixed an issue in the production software where right-clicking reversed the layout order, and the cutting point changed accordingly.
• Added horizontal layout view.
• Fixed an issue where the layout label displayed the irregular contour incorrectly.
• Added support for Nanxing series files. Z datum point setting.
• For Nanxing optimized files, area milling is performed based on the tool diameter in the production software.
• Interfaced with Xin Hong Tian integrated machine, new version. Ban files process back-side grooves, generating label files and NC files for front-side grooves, and NC files for cutting processing.
• Added support for door panel processing, left and right opening doors, and added door panel processing QR code.

Left Opening: L2000H6A100B100C500D800E1200F1700K;

Right Opening: L2000H6A100B100C500D800E1200F1700JIK

Scan this QR code for direct machine processing. L: Door panel length; H: Number of holes; A: Distance from hole to bottom; B: Distance from hole to top; C: Distance from 2nd hole to top.

D: Distance from 3rd hole to top; E: Distance from 4th hole to top; F: Distance from 5th hole to top; where F>E>D>C>B.

• Fixed an issue where an extra groove appeared in the middle of an arc baseboard when no groove was set.
• Added option for specifying colors without textures.
• Added layered processing for vertical grooves.
• Added visible surface edge banding setting.
• Added option to not cut but generate labels for leftover materials.
• Fixed an issue where edge banding information was not fully displayed in the material list.
• Added a new wrap-around cutting method to reduce the probability of panel misalignment.

Sorting and Packaging Software

• Fixed an issue where the total serial number on the label in the sorting and packaging software would change.
• The sorting and packaging software needs to display multiple remark columns. This is mainly for factories that only produce door panels, and customer name, room name, and cabinet name need to be displayed in the remarks.

 

Feature Details

Design Software

• Fixed an issue where the exported edge banding list did not automatically generate based on the thickness of the panels.

In the export report, in the report settings, check the function shown in the image below. The hardware list table finally exported will display the specific information of the edge banding.

 

• Fixed For CAD imported panels, if there are holes smaller than the cutting tool diameter, the corresponding tool needs to be used to process these holes.

In the drawing interface, the imported CAD files, if the hole diameter is smaller than the cutting tool diameter, the corresponding tool will be used for processing.

 

• Fixed an issue where cabinet data could not be saved.

Fixed an issue where cabinets could not be saved due to unstable network conditions, and then modifying the name caused the cabinet to be lost.

• Added grid lines with an option to enable or disable them.

In the order interface, under Help and Settings, you can choose whether to use the indicator grid.

• Fixed an issue where the end cap needed to appear on the door panel list; the end cap setting name, including the words "door panel," appears on the door panel list.

In the drawing interface, mainly set the name of the panel. If the name contains the words "door panel," then the exported quotation will include this panel.

• Fixed an issue where hole positions on the left side of a mirrored cabinet were missing on the right side.

Fixed an issue where hole positions on the left side of a mirrored cabinet were missing on the right side.

 

 

 

• Modified the display length of panel names.

Increased the display length of panel names in the drawing interface.

• Added options for edge banding on drawers: edge banding on the punched side only, or edge banding on the unpunched side only.

In the drawing interface, add a drawer to the component, and set the edge information of the drawer box in other settings.

• Added arc baseboard, priced by area.

Add component →Add arc skirting board, increase the calculation method of arc skirting board price.

• Added search function to the material list box.

Set materials in the design software and add a material search function.

• Fixed Fixed an issue where the door panel marking lines were reversed in CAD and PDF exports.

Fix design software export the issue where the annotation lines in cad and pdf files are reversed.

• Added support for chamfered arc cabinets.

In the drawing interface, in the right chamfer function, add the arc cabinet function. Using this function, the panels included in this range can be uniformly made into arc panels. Selection of the space is required before adding.

• Fixed an issue where editing a door panel would cause the door panel color to be re-added.

Fix the issue where the component color reverts to the default color after editing the component.

• Fixed an issue where door hinges replacing hardware and shelves/side panels caused collisions in the groove.

Fix the issue where the door hinge replaces hardware and the layer board/side panel collision creates a slot. As long as the door hinge replacement hardware name contains "hinge" or "door hinge", it will not generate a slot with the layer board/side panel.

• Added custom door hinge prefix.

Add a custom function for the door hinge prefix, allowing you to add a door hinge prefix based on the specific situation.

• Modified the copying of panels to remove the "(copy)" suffix.

Modify the extra "copy" characters in the name of the copied component after copying the component.

 

Production Software

• Added Ban Jidong handle-free design: set for single-pass processing, only using the forming knife.

In the production software, in CNC settings, set in the six-sided file. As shown in the figure below, it is mainly used for processing the handle on the surface of the Jidong machine.

• Add docking door panel processing, left and right opening doors, and add door panel processing QR code.

In the production software, add the door panel processing QR code to the label. The operation is as follows.

• Fix the problem of incorrect processing files caused by the automatic start and stop of six-sided information, Jidong processing files, Jidong six-sided files, and Nanxing optimization series files.

In the production software, the problem of incorrect hole positions in the six-sided file caused by the automatic start and stop of the door panel has been fixed.

 

 

• Fix the production software, right-click the mouse, reverse the layout order, the cutting point needs to change accordingly.

Production software fixes the problem that the cutting point does not change after setting the reverse processing order.

• Add horizontal layout diagram to production.

In the production software, add a horizontal layout diagram to the label, as shown in the figure below.

 

• Nanxing file support Z datum point setting.

Nanxing series files, add Z-axis reference point setting.

• Fix the issue where the irregular contour is not displayed in the layout label.

In the label, fix the issue where the irregular contour is not displayed.

• For Nanxing optimized files, area milling is performed based on the tool diameter in the production software.

Nanxing optimization file, area milling processing, the processing path is generated according to the tool diameter set in the production software.

• Docking Xin Hongtian integrated machine, new version A9 machine.

Interfaced with Xin Hong Tian integrated machine, new version. The ban file punches the reverse side grooves, the label file and nc file punch the front side grooves, the nc file is used for cutting processing, and the settings are shown in the figure below.

• Fixed an issue where an extra groove appeared in the middle of an arc baseboard when no groove was set.

Production software fix: when the arc skirting board is set without a slot in the design software, a slot automatically appears in the middle.

• Added option for specifying colors without textures.

Add specified color without texture to the production software. After importing the colors included in the following figure, the textures are automatically removed.

• Added layered processing for vertical grooves.

Vertical slot layered processing function, automatically calculates the number of layers to be cut according to the set processing depth.

• Added visible surface edge banding setting.

Add the visible surface edge banding diagram. It will only take effect after setting the visible surface edge banding in the design software. The visible surface refers to the surface that does not contact other components.

• Added option to not cut but generate labels for leftover materials.

Add the function of not cutting but printing labels for remaining materials in the optimization configuration.

• Fixed an issue where edge banding information was not fully displayed in the material list.

Fix the issue where the edge banding is not fully displayed in the material list.

• Added a new wrap-around cutting method to reduce the probability of panel misalignment.

Add a new surrounding processing method. This processing method is a circular processing of small panels, and the last processed panel is placed in the center of the large panel, which can effectively reduce the probability of panel running, but will increase the processing time.

 

Sorting software

• Fix the issue where the total serial number on the label of the sorting and packaging software changes.

In the sorting and packaging software, the problem that the total serial number of the package changes each time it is re-imported.

• Add a display column function to the sorting and packaging software, allowing customers to select the columns they need to display.

Set the display column function in the sorting and packaging software.

 

Xin Xiaoyuan Cloud Design 1.9.6.4 Download

Xin Xiaoyuan Cloud Production 3.7.2.6 Download

Xin Xiaoyuan Sorting and Packaging 1.1.0.4 Download