Beijing Xinxiaoyuan Software
News Center
Focus on panel furniture design and research and development | Committed to empowering the development and innovation of China's traditional manufacturing industry
What types of opening machines are there?
Publish Time:
2021-09-18 17:24
Source:
What types of panel saw machines are there?
Four-step panel saw : This equipment is specifically suitable for cutting panel furniture. It has three or four cutting heads with automatic tool changing, drilling, grooving, cutting, and shaping functions. Cabinet doors and panels can also be considered. Even high-configuration four-step panel saws are cheaper than other panel saws and processing equipment. For some newly established small and medium-sized panel furniture factories with lower budgets, and for factories under greater financial pressure, this is a good choice.
Dual-axis drilling and routing processing : A dual-axis drilling and routing panel saw, as the name suggests, is a cutting device with dual-axis drilling and routing. The two spindles are responsible for grooving and cutting respectively, and automatic tool changing is achieved through pneumatic cylinder switching. 5+4 The vertical drilling and routing achieves a fast drilling function, automatically switching during processing, with high speed and accuracy. The dual-axis drilling and cutting machine can achieve automatic cutting, punching, grooving, and plate pushing of the panels. With 5+4 drill bits, holes can be drilled in adjacent positions, which is very suitable for the processing of wardrobes and other cabinets.
Disc processing : The disc tool change center point, also known as the hat tool change center point, is a common type of machine tool. The magazine can move with the spindle or be placed on the side of the machine frame.
The advantage of the former is that the tool change speed is faster, generally within 12 tools. Not suitable for 16 tools or 20 tools, heavy tool heads. If using 20 tools, the Z axis and gantry's load-bearing requirements are too high, especially Z the wear and tear of the Z-axis screw and guide slider is high.
With long-term use, the accuracy decreases rapidly. The tool magazine placed on the side of the machine frame can be 12-20 tools, stable, and the tool change speed is slightly slower than that next to the spindle. However, long-term use will not affect the accuracy and stability of the machine.
What aspects should customers pay attention to when choosing? Choose the right one. In the disc tool change processing center point, because most servo tool magazines use a set of servos, the cost is high, the tool change speed is fast, and the accuracy is high. Commonly used control systems and servo motors include new systems, servo motors, and new bus servo motors.
And the cost is relatively high. The total price will be higher than the linear tool changer. Of course, the disc tool change center point can also be configured with other corresponding servo motors, with little difference in performance.
Linear tool change center point : This model is suitable for customers who integrate doors and cabinets in panel furniture. Multi-functional, it can meet most of the customer's processing requirements. Very cost-effective.
Opening machine
Previous Page
Related News
Beijing Xinxiaoyuan Software Development Co., Ltd.
You can also dial one-on-one consultation telephone: +86-18027671488
Contact Us
ADD：Zhongguancun North District, Haidian District, Beijing
E-mail：404648544@qq.com
Scan to Follow Official Account
Scan to Get a Quote